Hack WiFi Account From Phishing Attack With WifiPhisher Tool

Hack WiFi Account From Phishing Attack With WifiPhisher Tool ..

Wifiphisher is a security tool that mounts fast automated phishing attacks against WiFi networks in order to obtain secret passphrases and other credentials. It is a social engineering attack that unlike other methods it does not include any brute forcing. It is an easy way for obtaining credentials from captive portals and third party login pages or WPA/WPA2 secret passphrases.

From the victim's perspective, the attack makes use in three phases:

1. Victim is being deauthenticated from her access point. 
Wifiphisher continuously jams all of the target access point's wifi devices within range by sending deauth packets to the client from the access point, to the access point from the client, and to the broadcast address as well.

2. Victim joins a rogue access point. 
Wifiphisher sniffs the area and copies the target access point's settings. It then creates a rogue wireless access point that is modeled on the target. It also sets up a NAT/DHCP server and forwards the right ports. Consequently, because of the jamming, clients will start connecting to the rogue access point. After this phase, the victim is MiTMed.

3. Victim is being served a realistic router config-looking page. 
Wifiphisher employs a minimal web server that responds to HTTP & HTTPS requests. As soon as the victim requests a page from the Internet, wifiphisher will respond with a realistic fake page that asks for credentials, for example one that asks WPA password confirmation due to a router firmware upgrade.

Requirements
1. Kali Linux.
2. Two wireless network interfaces, one capable of injection.

For Usage

Short form	Long form	Explanation
-m	maximum	Choose the maximum number of clients to deauth. List of clients will be emptied and repopulated after hitting the limit. Example: -m 5
-n	noupdate	Do not clear the deauth list when the maximum (-m) number of client/AP combos is reached. Must be used in conjunction with -m. Example: -m 10 -n
-t	timeinterval	Choose the time interval between packets being sent. Default is as fast as possible. If you see scapy errors like 'no buffer space' try: -t .00001
-p	packets	Choose the number of packets to send in each deauth burst. Default value is 1; 1 packet to the client and 1 packet to the AP. Send 2 deauth packets to the client and 2 deauth packets to the AP: -p 2
-d	directedonly	Skip the deauthentication packets to the broadcast address of the access points and only send them to client/AP pairs
-a	accesspoint	Enter the MAC address of a specific access point to target
-jI	jamminginterface	Choose the interface for jamming. By default script will find the most powerful interface and starts monitor mode on it.
-aI	apinterface	Choose the interface for the fake AP. By default script will find the second most powerful interface and starts monitor mode on it.

Wifiphisher works on Kali Linux and is licensed under the MIT license

Download now